CPI offers OnTrac® Wire Mesh Cable Tray, a complete solution for indoor cable pathway applications. OnTrac creates point-to-point pathway for network cabling in data centres, network equipment rooms and office spaces. It installs quickly and can be cut to form smooth curved transitions around obstacles. Route cables under access floors or above acoustic ceilings to create hidden pathways for cables.
New Shaped Tray A new addition to the OnTrac product line is OnTrac Shaped Tray. Shaped Tray features unique flattened cross wires, which increase cable support by providing a much larger contact surface for cables, resulting in a 63% reduction in cabling strain/pressure.
OnTrac Features:
Contact Sales Support if you have questions about:
Call +44-1628-524-834. In the U.S. and Canada, call 1-800-834-4969.
Or you can submit a Customer Support Request.
Hours: Mon. - Fri., 9am to 5pm BST OR Mon - Fri, 5am to 5pm, U.S. Pacific Standard Time
Find a CPI Sales Rep Near You
OnTrac Shaped Wire Mesh Cable Tray Products feature unique flattened cross wires, which increases cable support by providing a much larger contact surface for cables. OnTrac provides point-to-point pathways for network cabling in data centres, network equipment rooms and office spaces.
Data Sheet eCatalog
Standard Wire Mesh Cable Tray features round cross wire. OnTrac provides point-to-point pathways for network cabling in data centres, network equipment rooms and office spaces.
Use in pairs to support wire mesh cable tray from the ceiling using threaded rod.
Use to support the end of wire mesh cable tray against the wall.
Use to support wire mesh cable tray from the ceiling with a single 3/8” (M10) threaded rod.
Use to support a wire mesh cable tray pathway along a wall.
Use to support wire mesh cable tray against the wall and ceiling.
L Support Bracket supports wire tray along a wall or under a floor.
Use with the L Support Bracket or Under Floor C Bracket to support wire mesh cable tray from access floor pedestals under an access floor.
Use to support wire mesh cable tray from adjacent access floor pedestals.
Use to attach wire mesh cable tray to the top of a two-post or four-post CPI Rack System.
Use to support wire mesh cable tray from the floor under an access floor.
Standard Splice Kit is used to connect sections of wire tray at intersections and turns.
Use to connect sections of Standard wire mesh cable tray together end-to-end; cannot be used with Shaped Tray. Quick installation with included tool; no hardware required.
Use to securely fasten two layers of wire mesh cable tray when connecting trays at 90° bends or intersections. May be used to attach tray to support.
Splice Bar creates a more secure end-to-end connection between wire tray sections.
Use to create a secure 90° T- or L-shaped intersection between two wire mesh cable tray sections. Kit includes all hardware needed to make one 90° T-shaped or two L-shaped intersections.
Cable Tray Divider is used to divide the internal area of a section of wire mesh cable tray to organize cables by type or zone.
Cable Tray Cover is used to cover the top of a section of wire mesh cable tray to protect or hide cables.
Cable Tray Bottom Insert is used to cover the bottom of a section of wire mesh cable tray to protect or hide cables.
Use to create a solid base and sides within the tray to protect cables.
Tool-Less Radius Drop is used to properly support cables as they exit or enter cable tray pathways.
Large Radius Drop is used to properly support cables as the cables exit or enter cable tray pathways. Secures cables through slots in the radius drop with cable straps or ties.
Data Sheet
Use to provide a curved support for cables exiting tray vertically.
Cable Tray Cutting Tool is used to cut wire mesh cable tray to fit and form pieces to match pathway requirements. Sold individually.
Split Bolt Grounding Clamp is used to attach a ground conductor to wire mesh cable tray. Split bolt attaches over the wires that form the tray. Slot accommodates #6 AWG wire; remove paint from tray for ground contact.
Use to create a physically separate pathway for cable support alongside the tray.
Use to fill the gaps created when cable trays are cut and formed into turns.
Use to attach up to three conduits, sizes 1/2”, 3/4” or 1” (20 mm, 25 mm or 32 mm) to the side of the tray.
Use to label a section of wire mesh cable tray to identify the pathway or a drop location.
Use to attach a single, dual or triple gang junction box to the side of the tray.